Standing Seam Metal Commercial Project
On this commercial project we applied the foam system (SPF) to an existing standing seam metal roof. We then applied a base coat, a top coat, and waterproofed the gutters with Conklin’s Affinity coating. This monolithic foam system provides approximately 85% reflectivity, resulting in energy savings in the summer and winter.
Ballasted Membrane Roof Restoration Project
This was a ballasted membrane roof system that we renewed by removing the old gravel layer and applying Conklin’s Spray Polyurethane Foam roofing system.
Ballasted Membrane Roof Restoration Project #2
This set was a ballasted membrane roof that we renewed by taking the gravel off and applying a Conklin Spray Foam system with base coat and top coat. This project is covered with an 18-year warranty.
Fabric Reinforced System
This set is a fabric reinforced system that we applied to an existing roof.
Foam System Roof Restoration
This is a foam system project that we applied to an existing flat roof. We applied one inch of Conklin’s Spray Polyurethane Foam with a Benchmark base coat and a Puma XL top coat.
Metal Roof Restoration Project
This set was a Metal Restoration System. We foamed all the roof flashing and the metal.
Foam System on Metal Roof
This was a metal roof that had coatings improperly applied over aluminum coating ten years prior and it had started peeling loose. We pressure-washed the entire roof down to the original metal and applied a Conklin foam system with an eighteen-year warranty.